Mississauga Toilet Install Tips and Information

The individual components of a toilet set out for a new Mississauga toilet install.
Are you thinking about the potential plumbing projects you could complete to improve your comfort and peace of mind? Have you considered a new toilet installed? There are some things that you simply can't avoid using throughout the day, so if you have a porcelain throne that feels more like a busted stone, you might want to consider getting professional service for a new Mississauga toilet install.

If you're suffering from issues caused by a broken toilet, or you're just tired of scheduling constant appointments for toilet repair, then you've probably already considered how a toilet install could change your life. There are a lot of benefits that come from replacing your old, outdated commode. Even if your current toilet isn't causing problems, there are still reasons to consider replacement, such as replacing a standard unit with a low-flow model to save water.

No matter what your goals are for your Mississauga toilet install, the best way to get more information is by seeking guidance from a team of experienced, knowledgeable Mississauga plumbers. Whether you need professional advice, expert tips or reliable plumbing installation services, you can always rely on Mr. Rooter Plumbing of Mississauga. We have the information and expertise to ensure you have everything you need for your Mississauga toilet install, including tidy, courteous service and answers to all your questions.

Can I Install a Toilet Myself?

You can take care of a Mississauga toilet installation yourself, but it's usually better to rely on professional service from expert plumbers. As with all the complicated systems that you use throughout daily life, such as appliances, automobiles, and plumbing systems, experts are always the best people to call when you need repairs or replacements.

If you are planning to attempt your own Mississauga toilet installation, there are a few important details you should consider before you begin. Replacing a plumbing fixture might seem as simple as replacing a lightbulb, but there are actually a lot of important considerations that you need to think about—especially for major fixture replacements.

The most important consideration is that a toilet installation is never a one-person job. Even if you're planning to do it yourself, you'll still need help at some point, especially when you're removing your old unit and lifting your new model into place. A porcelain dish might be light, but that new porcelain toilet is heavy. A standard one-piece toilet weighs about 40 kg (80 lbs). The last thing you want is to break your new replacement by dropping it, or to injure yourself attempting to lift it on your own.

The second key consideration is that this type of work is more specialized and specific than other simple DIY jobs. Even if you've completed other projects, you may be lacking the tools, skill, or expertise required to get the job done right. There are many potential steps where a mistake could be made during a toilet install, which is why many people choose to rely on their skilled plumber instead.

What You'll Need to Do it Yourself:

  • Replacement Toilet
  • Plumber's putty
  • Replacement water supply line
  • Replacement bolts
  • Toilet seat
  • Toilet flange
  • Wax seal
  • A marker
  • Screwdriver set
  • Hacksaw
  • Tubing cutter
  • Adjustable wrenches

Could a Handyman Take Care of a Mississauga Toilet Install?

When it comes to hiring a professional for your Mississauga toilet installation, you should only use a licensed plumber. While this may be a job that anyone can do in their own home, only your local plumbing company will have the correct licensing and insurance coverage required for providing professional plumbing services. That's as true for this kind of work as it is for any major Mississauga plumbing repairs.

Choosing an unlicensed or inexperienced handyman may result in poor installation, which will inevitably lead to a future plumbing issue. Relying on your local plumbing experts for your Mississauga plumbing installation will ensure that the job is done right, which means you won't have to worry about a potential plumbing emergency after your installation is complete.

Mississauga Toilet Install: The Advantage of Using Licensed Plumbers

The biggest advantage of using your professional plumber for plumbing replacements and installations is that you get peace of mind from knowing those jobs are done right. Of course, that's not the only benefit. The skill, expertise, and professional training of experienced plumbers come with a wide variety of additional benefits for any Mississauga toilet install.

The Benefits of Getting Service from a Professional Plumber Include:

  • Quicker, more efficient installations and replacements
  • Guaranteed parts and services
  • Full licensing and insurance coverage
  • Convenient appointment times and 24/7 emergency support
  • Full clean-ups—we always leave your home exactly as we found it!

How Much Should You Pay for a Professional Mississauga Toilet Install?

The cost of a Mississauga toilet install varies based on several factors—especially if there are additional complications that occur during your appointment. The best way to determine your costs is by speaking directly with a plumbing expert about your specific needs. Fortunately, local experts like those at Mr. Rooter Plumbing of Mississauga are always happy to provide upfront, honest estimates for their work, so you never have to wonder how much your Mississauga toilet installation will cost.

Factors That Affect Mississauga Toilet Install Costs Include:

  • The type of model you purchase
  • The brand you choose
  • Whether you are moving your fixture to a new location or room
  • The amount of time required
  • Unexpected complications, such as cracked parts or broken connections

DIY Installation Steps:

  • Turn Off Your Water: Whether you are replacing an existing fixture or completing a new toilet install, you must turn off your water before you begin. That can be done by closing the shutoff valve located on the wall behind your toilet base, or by shutting off the water to your entire property at your main shutoff valve.
  • Prepare Your Bathroom and Yourself: You may want to lay down some towels around your work area, to absorb potential leaks and protect your bathroom flooring. Most professionals also recommend wearing basic safety gear, such as work goggles and waterproof gloves.
  • Remove Your Old Model: If you're replacing an existing fixture, remove it by draining it, disconnecting the supply line, unbolting it from the floor, breaking the wax seal, lifting it away, and removing the old seal. The best way to break the seal is by gently rocking the bowl back and forth. If you have a two-piece model, you must first unbolt and remove the tank before removing the base.
  • Inspect Your Flange: If your flange is still in good condition, it's possible to re-use it, but you should still replace those bolts holding it in place. If you have a broken flange, you must replace it.
  • Install Your New Seal: Place your new wax seal over your flange, ensuring that it fits correctly and is centered.
  • Install the Base: Lift your replacement model into place over the bolts and lower it onto the seal. Gently rock the base back and forth to ensure that the wax ring on your flange sets correctly and creates a tight seal.
  • Bolt your Base into Place: Tighten the nuts over your replacement bolts, using a wrench to ensure they are snug. Do not overtighten the nuts. Use your hacksaw to cut away any length of excess bolt, so that your floor bolts fit your bolt caps, then fill your caps with plumbers' putty if necessary before installing them. Some caps don't require putty and simply snap onto their bolts.
  • Install Your Tank: For two-piece models, you must now install your tank by inserting the tank bolts into the tank and setting it on top of the base. Use a wrench to hold the bolt nuts below the tank while you tighten the bolt from the inside with a screwdriver. It's important that you do this carefully and don't overtighten those bolts so that you don't crack your tank or base.
  • Attach Your Supply Line: Hold your supply tube near its connection point at the base of your tank and let it extend to your shutoff valve. Use a marker to draw a line where you'll cut the tube, ensuring that there is enough length left for it to fit tightly inside your valve. Cut your line with a tubing cutter, attach it to your tank by hand-tightening the tank nut, and then slide the compression nut over the other end. Then insert the other end into your shutoff valve and tighten the compression nut. Do not overtighten it.
  • Turn on Your Water Supply: Open the shutoff valve behind your toilet bowl and allow the tank to begin filling. Check for any leaks near your supply valve or the base of your tank. Once the tank is full, complete a test flush to confirm that all internal components are working and connected properly.

What Are The Different Types of Toilets You Can Install in Mississauga?

One-Piece Vs. Two-Piece Models:

The two basic types are one-piece and two-piece units. As their names suggest, one-piece models come as one complete unit, while two-piece models have a separate base and toilet tank. The main difference between each type is the extra installation step required for a two-piece unit.

One-piece models are sometimes considered easier to clean, but they're also heavier. Two-piece models are a great choice for someone looking for more customization options related to height. Both types have the potential for extra features like a heated toilet seat or bidet installations.

Circular Vs. Elongated Bowl:

The shape of your bowl is another key consideration for any Mississauga toilet install. Circular bowls are more traditional and take up less space. They're a great option for a smaller half-bathroom or powder room, but they can be uncomfortable for some people. Elongated toilets are considered to be more comfortable for many people, and they're also often chosen by people in Mississauga with additional accessibility needs.

What Are the Different Types of Flush Systems?

  • Dual Flush Toilets: A water-saving flush system with two different buttons for solid and liquid waste.
  • Single Flush: A common variety that uses an internal flapper and gravity-assisted system that flushes with the same amount of water every time.
  • Pressure Assisted Toilets: A system that uses compressed air to create a more powerful flush, but which also creates more noise during use.
  • Double-Cyclone: A system designed and used by TOTO which features two nozzles that create a whirlpool effect when you flush to help clean your bowl. In some newer models, the double-cyclone system has been replaced by an improved version known as the tornado flush system.
  • Tower Flush: An advanced version of the standard flapper system designed and used by Kohler, which features a canister-shaped flapper that allows more water to enter your bowl, creating a more powerful flush.
  • Double-Vortex: Similar to the double-cyclone system, American Standard's double-vortex features two nozzles that create a whirlpool effect, but it also directs some water straight into your drain to help push waste sitting there.

What Kind of Toilet is Best?

The best option for you depends on your unique needs. It's more important to pick something comfortable and convenient than it is to pick something that has the best overall rating. Of course, popular brands like Kohler, American Standard, TOTO and Saniflo are common choices in Mississauga, but you should also think about the shape of your bowl and whether you want a one-piece or two-piece unit.

Do You Need Professional Assistance for a Toilet Install in Mississauga, ON?

Mr. Rooter Plumbing of Mississauga is always here to help when you need a reliable plumber. We don't just provide tips and advice for things like a new installation or plumbing maintenance. Whenever you need professional installation services, we're here to help with that too.

We proudly serve many communities throughout Mississauga, such as Erin Mills and Mineola, with a wide range of plumbing services. Whenever you need a dependable plumber for something like a faucet replacement, a toilet install, or Mississauga drain cleaning services for your sink drains, we're here to provide exceptional service and satisfying results.

Call to schedule a convenient appointment with our team or learn more about our services.